Pegboard Jig Print Set — Bambu A1 mini slicing guide
Print-ready parts for all five proposals from the explorer (pegboard-saddle-jig).
Everything is modelled already in print orientation — no rotations needed in
the slicer, and no supports anywhere. Parts are split so nothing has to
print as one overhanging object, and the big plates are ribbed frames
(bosses + ribs, not solid slabs) to keep time and material down.
Pattern: 10mm holes, 50mm grid, 18mm plywood, 25mm edge offset
(same as pegboard-drilling-jigs).
Profile used (verified by actually slicing every part)
- Printer: Bambu Lab A1 mini, 0.4 nozzle (180×180 bed — largest part is 169mm)
- Process:
profiles/jig_max_028_A1M.json— fully flattened profile (noinherits, so every value is explicit — BambuStudio's CLI does not resolve inheritance for file-based profiles). 0.28mm layers, 4 walls, 20% gyroid infill, ~160mm/s print speeds, arachne wall generator. - Filament:
profiles/jig_pla_a1m.json— Bambu PLA Basic values with 225°C nozzle for better layer bonding. (The stock profile reports 200°C / 12mm³/s, which starves fast printing.) - G-code for this profile lives in
gcode_jigmax/;gcode/keeps the olderfast_jigslices for comparison.
Parts → proposals (sliced G-code included in gcode_jigmax/)
| STL | Proposals | Print notes | Size mm | Time | PLA |
|---|---|---|---|---|---|
starter2_plate |
1, 2, 4, 5 (starter / P5 body) | flat, bosses up | 115×115×6 | 2h 02m | ~46g |
starter2_fence |
1, 2, 4, 5 | walls on bed, brim | 119×119×32 | 55m | ~34g |
leapfrog_bar |
1 | pins up | 131×44×16 | 56m | ~28g |
row_bridge |
1, 2 | pins up | 86×86×16 | 1h 18m | ~32g |
starter3_plate |
3 | flat, bosses up | 165×165×14 | 3h 50m | ~89g |
starter3_fence |
3 | walls on bed, brim | 169×169×32 | 1h 11m | ~48g |
grid_tile |
3 | pins up | 136×136×16 | 2h 56m | ~71g |
rail_frame |
4 | pins up | 120×63×16 | 50m | ~23g |
rail_carriage |
4 | as exported; one 12.6mm bridge | 34×30×18 | 25m | ~10g |
rail_key ×2 |
4 | standing on head, brim | 12×12×13 | 4m ea | ~1g |
pin_insert ×2 |
5 | flange on bed, pin tower | 25×25×35 | 15m ea | ~3g |
Per-proposal kits
| Proposal | Parts | Total time | Total PLA |
|---|---|---|---|
| 1 — Leapfrog bar | starter2 plate + fence + bar + bridge | ~5h 10m | ~140g |
| 2 — Row bridge | starter2 plate + fence + bridge | ~4h 15m | ~112g |
| 3 — Grid tile | starter3 plate + fence + tile | ~7h 55m | ~208g |
| 4 — Indexed rail | starter2 plate + fence + frame + carriage + 2 keys | ~4h 20m | ~114g |
| 5 — Convertible | starter2 plate + fence + 2 pin inserts | ~3h 25m | ~86g |
All 11 parts together: ~15h (was ~37h on the old gcode/ slices) — the
extra wall loop + denser infill costs ~25% more filament but cuts print time
~60% and is stronger. gcode/ still holds the leaner fast_jig variants
if you want minimum material instead.
The exact CLI command (per part)
B=/Applications/BambuStudio.app/Contents/MacOS/BambuStudio
S="$HOME/Library/Application Support/BambuStudio/system/BBL"
M="$S/machine/Bambu Lab A1 mini 0.4 nozzle.json;$PWD/profiles/jig_max_028_A1M.json"
F="$PWD/profiles/jig_pla_a1m.json"
"$B" --slice 0 --arrange 1 --load-settings "$M" --load-filaments "$F" \
--outputdir "gcode_jigmax/<part>" stl/<part>.stl
Batch:
for f in stl/*.stl; do n=$(basename "$f" .stl); mkdir -p "gcode_jigmax/$n"
"$B" --slice 0 --arrange 1 --load-settings "$M" --load-filaments "$F" \
--outputdir "gcode_jigmax/$n" "$f"; done
Assembly notes
- Bushes: press 12mm OD / 10mm ID metal bushes into the Ø11.9 seats until
they bottom on the Ø10.4 shoulder. Slip fit → raise
bush_hole_dto 12.1 and add CA. PLA is brittle at these walls — press slowly, warm the boss if tight. - Pins (bar/bridge/tile/frame): integral, printed as posts. In use they point DOWN into drilled holes — flip the part after printing. Sand the lead-in chamfer if they bind; drill a test hole first.
- Starter fence → plate: tabs locate in the edge notches; fit M3 × 12 mm
pan-head/self-tapping screws through the fence clearance holes into the plate
pilot holes. Tighten gently; PLA can split if overtightened. For a removable
joint, use M3 machine screws with heat-set inserts installed in the plate
(increase pilot/insert geometry before printing). The pilot holes are sized
for self-tappers; do not force machine screws into them.
pin_insertdrops into any unusedstarter2_platebush seat — Proposal 5's conversion needs zero extra hardware beyond 2 inserts. - Rail: carriage drops over the y=50 track;
rail_keypins it to the x=0 or x=50 detent. Detents/keys are nominal — expect to sand the key. - Brim matters most for: both fences,
rail_key,pin_insert. Everything else has a fat footprint.
Edit → re-export
All parametric sources are in scad/ and share params.scad (pattern + fits)
and frame.scad (ribbed-plate + boss/pin modules):
~/Applications/OpenSCAD.app/Contents/MacOS/OpenSCAD \
-o stl/<part>.stl scad/<part>.scad
Honest caveats
- Test
row_bridgefirst (3h, 25g): validates pin entry into a real drilled hole + bush press fit before committing to a full kit. - The fast profile trades some toughness for time — fine for jigs, but don't
lean the jig against a clamp crush; if a pin snaps, re-slice that part with
wall_loops4–5. - Clearance, rail play and pin binding need a scrap-plywood dry run.
- Outer plate corners are rounded in plan view and small exposed corners have edge breaks to reduce sharp corners and ease fast printing. These are geometric corner treatments; they do not change functional locating faces, bush seats, or pin dimensions.
- Estimates are the slicer's own, A1 mini + PLA Basic.